Warranties
Wheel Pros (American Racing, Foose, U.S. Mags)
To the fullest extent recognized by the laws of the state where the wheel was purchased, Wheel Pros issues this limited warranty to define the rights of the purchaser, and limit Wheel Pros liability, with regard to warranty claims.
Wheel Pros warrants that our wheels will be free from structural failure under normal and intended use for as long as the original retail purchaser owns the product. Customers are specifically directed to the Wheel Pros Consumer Information and WTC Aftermarket Wheel Installation Guidelines, supplied with the wheel. Failure to comply with these instructions shall void this warranty.
Except as specifically set forth below, Wheel Pros warrants that products manufactured will be free from defects in material and workmanship under normal intended use for a period of one year from retail purchase.
- Wheel Pros warrants that chrome and painted aluminum finishes will be free from peeling or lifting on the face of the wheel for a period of one year.
- Wheel Pros warrants that PVD finishes will be free from peeling or lifting on the face of the wheel for a period of two years.
- Polished aluminum wheels, that have not been clear coated, oxidize. They require regular maintenance. Polished aluminum finishes are not covered under warranty.
- Excluding surface rust or corrosion, Wheel Pros warrants the paint and plating on steel wheels for a period of 90 days.
- In no event shall Wheel Pros be liable for any special, incidental or consequential damages.
- This warrant is not applicable if:
- Damage occurred due to failure to follow completely the instructions provided in the Wheel Pros Consumer Information and WTC Aftermarket Wheel Installation Guidelines;
- Corrosion or damage occurred due to improper maintenance;
- Damage or structural failure occurs as a result of an accident or road conditions;
- Damage or structural failure occurs as a result of improper use of the vehicle including, but not limited to, on and off-road racing.
This limited warranty is the sole express warranty given and is in lieu of all other warranties, express or implied, whether oral or written. All implied warranties, including, without limitation, warranties of merchantability or fitness for a particular purpose, are hereby disclaimed.
Wheel Pros products are not designed to be used with any accessories or adapters other than those supplied and/or approved in writing by Wheel Pros. Use of any accessory or adapter not manufactured by Wheel Pros voids this warranty.
To initiate a warranty claim, the purchaser shall return the wheel for visual inspection to the retail or wholesale dealer from whom the product was originally purchased; along with a copy of the original sales receipt. “Should the dealer determine that the wheel has failed to perform as expected under this warranty the wheel will be repaired or replaced at the sole and absolute discretion of the dealer. Such repair or replacement shall not include the cost of removal, shipping, installation or reinstallation of the wheel.
This warranty expires upon transfer of title of any products by the original retail purchaser.
IMPORTANT: If returned products are found ineligible for warranty coverage, the product will be returned to the sender, without repair or replacement, at the sender’s expense.
TWG The Wheel Group (Ridler, and Ion Alloys)
Subject to the terms and conditions set forth herein below, TWG offers the Limited Warranty as follows:
The Wheel Group (TWG) offers a limited warranty on all wheels (product) to cover against manufacturing defects in workmanship and materials under normal and intended use. Wheels manufactured by TWG will carry a lifetime structural warranty for the life of the product to the original retail purchaser of the product. This limited warranty excludes all products manufactured under IONBILT, which carry a sixty (60) month structural warranty from the original date of purchase.
TWG further warrants to the original purchaser that:
Finish Warranty:
All painted, chrome plated, PVD or clear coated wheels will be free from defects in material and workmanship under normal and intended use for a period of twelve (12) months from the date of retail purchase.
Polished and uncoated/raw finish wheels oxidize and require regular maintenance. Polished aluminum and uncoated/raw wheels are not covered under this warranty.
Surface rust, pitting or discoloration, which are direct results of improper maintenance, are not covered by this Limited Warranty.
TWG’s sole and exclusive obligation under this Limited Warranty shall be to repair or replace at TWG’s sole discretion, without charge up to the original purchase amount, any Product that does not conform as warranted herein and is returned with a copy of the original sales receipt or satisfactory evidence of date of purchase to the dealer from whom the Product was originally purchased or to TWG. Such repair or replacement shall not include incidental charges such as removal, installation or shipping. In no event shall TWG be liable for special, incidental or consequential damages. Wheels replaced under warranty will be covered for the remainder of the original Limited Warranty in place for that specific Product at that time.
This Limited Warranty is Void if:
Corrosion or damage occurred due to improper maintenance; refer to Recommended Wheel Care Instructions below for correct wheel maintenance.
Damage or structural failure occurs as the result of road conditions, road hazards or an accident.
Damage or structural failure occurs as the result of racing applications or willful abuse.
Damage occurs due to neglect or adverse weather conditions.
Product has been altered, modified, powder coated, painted or repaired other than by TWG.
Damage resulted from improper mounting, excessive vehicle loads, and/or incorrect tire sizes.
Wheels installed and used on vehicles with a load rating that exceeds the load rating of the wheel regardless of the damage or structural inadequacy of the wheel.
Wheels that have been mounted with accessories or adapters other than those supplied or approved by TWG regardless of the damage to the wheel and/or vehicle.
This Limited Warranty is the express warranty given by TWG and is in lieu of all other warranties, whether written or oral.
This Limited Warranty expires upon transfer of title of any TWG Products by the original retail purchaser.
Disclaimer
OTHER THAN AS EXPRESSLY STATED HEREIN, TWG GIVES NO WARRANTIES HEREUNDER ON THE PRODUCTS AND HEREBY EXPRESSLY DISCLAIMS ANY AND ALL OTHER WARRANTIES, INCLUDING ALL IMPLIED WARRANTIES OR CONDITIONS, OR WARRANTIES OR CONDITIONS OTHERWISE ARISING BY OPERATION OF LAW, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT.
Disclaimed Liability. In no event will TWG be liable to any purchaser arising out of any claim, demand, suit, action, allegation, or any other proceeding involving Products that have been altered or repaired other than by TWG or installed on customized vehicles (i.e., non-OEM vehicles).
Recommended Wheel Care Instructions
Wheels require regular maintenance to retain their factory finish and notable appearance. Wheels that have been neglected or improperly maintained will be void of all warranties.
Wheels should be cleaned by hand regularly to remove contaminants like road grime, salt, ice/snow melting chemical and dirt, which traps moisture and cause corrosion to most wheel finishes. Brake dust is highly corrosive and may cause pitting of the wheels finish. Household chemicals are typically too harsh for your wheels finish and should be avoided. A mild car wash soap or dish soap works best to properly clean your wheels.
Never clean your wheels when they are still hot from driving. Do not attempt to cool hot wheels with water as this may cause damage to the finish and can warp the brake rotors and/or drums.
Chrome Plated Wheels:
Clean chrome wheels when they are cool to the touch using a mild car wash soap or mild dish soap and water. Dry immediately with a soft cloth to prevent spotting. After cleaning, apply a coat of soft non-abrasive cream wax or wheel polish to seal the wheel and prevent surface corrosion.
Painted, Machined, PVD and Clear Coated Wheels:
Clean painted, Machined, PVD and Clear Coated wheels when they are cool to the touch using a mild car wash soap or mild dish soap and water. Dry immediately with a soft cloth to prevent spotting.
Polished Aluminum Wheels:
Clean a polished aluminum finish when they are cool to the touch using mild car wash soap or mild dish soap and water. Dry immediately with a soft cloth. Polished wheels (that are not clear coated) will diminish over time and require additional care and maintenance. A specially formulated custom wheel polish designed for non-clear coated polished wheels is recommended to return shine to oxidized wheels along with a wheel seal designed for non-clear coated polished wheels. The finish on polished aluminum wheels is not covered under any warranty.
Automatic spray and touch free car washes do not completely remove contaminants and can cause harm to the finish. In addition, automatic car washes and the cleaning agents and brushes used to clean tires can damage the wheel surface. Hand washing is strongly recommended.
Many areas of the country use road salts and chemicals during the winter months that can cause adverse effects on your wheels; it is recommended to clean more frequently during this season. Failure to do so may greatly reduce the life of the product.
Vision
Vision Wheel Limited Lifetime Structural Warranty:
Vision Wheel Company warrants to the original retail purchaser that Vision products will be free of structural, manufacturing, or material defects, if used under normal and intended use as long as the original retail purchaser owns the product. Invoice or bill of sale in the name of the original purchaser shall provide proof of original evidence. This warranty is not transferable.
Vision Wheel Limited Chrome and Painted Finish Warranty:
Vision Wheel warrants the factory chrome or painted finish on products for one (1) year from the original time of purchase. This warranty covers only peeling and separation of the chrome from the wheel. Pitting is preventable and is not covered by this warranty.
Warranty Policies:
Vision Wheel’s sole and exclusive obligation under this warranty shall be to repair or replace, at Vision Wheel’s sole discretion, without charge, any Vision Wheel product which is returned (freight prepaid) to the dealer from whom the wheel was originally purchased, and which, after Vision Wheel’s examination, shows that said product has failed in normal use and service due to defects in material and/or workmanship. Such repair and replacement shall not include installation.
Warranty Limitations:
This is a Limited Warranty. Therefore no warranties or representations expressed or implied, including warranties of merchantability and use for fitness for particular purpose to the extent the law of the state and federal law allows. Vision Wheel neither assumes nor authorizes any dealer, representative or other person or entity to assume for it any obligation or liability in connection with Vision Wheel products or applications. Vision Wheel further reserves the right to make changes or improvements in design, materials or specifications or make product changes without incurring any obligations to replace, change or improve products manufactured prior hereto.
Vision Wheel will not be responsible for any damage or loss caused by delays, failure, or any consequential damage regardless of cause. Vision Wheel will not be responsible for labor, transportation, or any other charges incurred in the replacement of repair of a defective part.
Wheels sold as “discontinued” merchandise only have a structural warrant. “Discontinued” wheels are sold as-is with no finish warranty.
This warranty gives you specific legal rights and you may also have other rights under state laws. No warranty or representation by anyone other than Vision Wheel will be binding by the manufacture.
The Warranty is Void if:
- The product is damaged in transit or misuse, accident or negligence, or has been repaired or altered by anyone other than Vision Wheel.
- The product is used in conjunction with any hardware, adapters, etc., other than those supplied by Vision Wheel.
- The product has had any repairs, modifications, or changes made by anyone other than Vision Wheel.
- Products that have been subjected to corrosion of the finish due to neglect, caustic cleaning chemicals, harsh car washes, adverse weather conditions and/or improper product care.
- Original invoice or sales receipt is not available for verification, or upon transfer of title on any products by the original purchaser.